Deciding to cover glass on the front door of your home can be an excellent way to add privacy, security, and beauty to your home.
With the variety of types of covers available on the market, however, it can also be hard to choose the best one.
That’s why we’ve decided to put together this step-by-step guide on How To Cover Glass Front Door For Privacy:10 Simple Ways! of your home using the best cover available on the market today.
How can I make my glass door more private?
Step 1: Select your frame
Stained glass kits come in various shapes and sizes, but most often they’re designed to cover a window or front door.
For example, if you are installing new glass doors in your home, look for a kit that is specifically designed for that purpose.
If you’re looking for privacy instead of decorative purposes, then select a frame that blocks light while still allowing you to see through it.
It should be obvious how it will fit together when you receive it so you won’t have any trouble figuring out how to install it.
Take extra care when buying stained glass: Some kits are better than others—and not all stained glass is created equal either.
Step 2: Purchase exterior hinges
In general, it’s better for privacy if your door can swing inward (not outward) and a hinge that allows it to do so is called an exterior hinge.
Exterior hinges are typically found in hardware stores, although you may need to order them online as well. Just be sure they’re designed for exterior use.
If you can’t find exterior hinges in a store near you, try going online; they typically have larger inventories than local stores.
Look for something that covers at least 25 square inches of glass when installed.
Step 3: Install your hardware
Whether you have a wooden front door or a metal front door, your first step will be attaching your hardware.
For most of these projects, you’ll want to use wood screws (for wood doors) or wall anchors (for metal doors).
When it comes time to do your measuring and drilling, take your time. The last thing you want is a crooked installation!
If you aren’t confident in your grilling skills, hold off and call in a professional instead. That being said: if all else fails, some people make their living repairing drill holes in glass—they can fix anything! However, we think it’s worth doing things right from the start.
Step 4: Measure and Cut your Fabric
Measure out your fabric and make sure you allow for some extra for overhang. For an entry door, it’s a good idea to get a longer piece of fabric so that you can fold it back to protect more of your house from prying eyes.
For example, if you have an 8-foot door, use 10 feet of fabric. Make sure there is at least 1 overhang all around. This is particularly important if you’re using see-through material like nylon or polyester.
Step 5: Attach Fabric to Frame
Using a staple gun, attach fabric over the door. Be sure that you staple from the top of the frame to the bottom and pull tightly.
Staple every 2 or so along with the fabric. If the frame is too wide for staples, tape corners and use Velcro instead.
For added privacy, secure with dark film (optional). Cut out holes for doorknob, keyhole, or sensors as desired.
You now have perfectly covered glass for privacy in your home! You can also add a layer of fabric under your existing curtains as an extra layer of privacy if you desire even more security in your home!
Step 6: Trim Edges
After you’ve gotten your edges as smooth as possible with a file, it’s time to trim. This is where you take your jigsaw and cut out any pieces of glass that are hanging off or could hang off in any way.
The trick here is not to worry about perfection—no one will see these edges after they’re finished. You want a close enough fit so there are no gaps between sheets of glass when they’re installed.
After you have all your pieces trimmed, use emery cloth and an angle grinder (or sanding sponge and hand sander) to finish everything up nicely.
Step 7: Attach Velcro & Hardware
First, apply two strips of Velcro (one strip on each side) to cover any holes or gaps between your glass and your door frame.
Then, attach metal brackets along with a rod with a roller system that allows you to smoothly close and open your curtain by turning a crank.
That way, you can get in and out of your home without those pesky peepers catching a glimpse at what’s inside.
It’s all about privacy! You can also try adding another layer of polyester fabric or other types of materials if you are looking for more privacy coverage.
There are plenty of curtain hardware options at most hardware stores; make sure that what you purchase is compatible with your front door as well as room temperature-resistant.
Step 8: Pull Cloth Taut Against Glass Panel
Once you have clamped one corner, stand back and pull your cloth taut against the glass. Make sure you pull it taut before proceeding, otherwise it will end up being too loose when you clamp it.
Hold a yardstick or tape measure along one edge of your pane as a straightedge to ensure that all four sides are straight.
It may take several tries; start again if any side is wavy or crooked. Be careful not to stretch or tear your fabric if you need to re-clamp or adjust later to make a piece of glass perfectly straight.
Once everything is straight, carefully secure it with the glazier’s points – just like picture hangers, these curved metal clips are designed specifically for holding the glass in place.
Step 9: Add Hooks & Hang Slider in Place
Now that your slider has been cut to size, it’s time to attach hooks and hang your curtain panel. Determine where you want your curtain hooks; typically, three evenly spaced along a 45-inch-wide window is enough (or two at each end of wider panes).
Once you know where they need to go, determine how far from each end of your hardware/fabric combination you’ll need them, and mark those spots with small dots.
Then measure from each dot diagonally toward each other in 5-inch increments (five marks total) and make a small notch with a utility knife for safety wire.
Use an awl or other sharp tool to poke holes in the glass where those notches are located. Drill holes that match up with those notches.
Step 10 (optional): Add an Extra Hinge Pully
If you have had your door a while and feel it’s too flimsy, add an extra hinge pully. These are inexpensive and easy to install.
Your door should feel more solid with one in place. This can also help keep your door open at any angle without sagging if your walls aren’t perfectly plumb, which is another benefit of adding a pully.
You may need more than one, depending on how much weight you want to add. But beware: Adding too many will make it difficult for you or others to close or open your front door when all of them are engaged, so think about where they would be most useful before choosing that option as a DIY home project.
Read more related Topics
- How To Soundproof a Bedroom-6 Easy and Cost-effective Techniques
- How to Make a Room Soundproof For Music
- Best Soundproofing Room Dividers 2022
People also ask:-How To Cover Glass Front Door For Privacy
2 thoughts on “How To Cover Glass Front Door For Privacy:10 Simple Ways!”